Cleaner wiping inside new kitchen cabinets after construction

What Does Post-Construction Cleaning Include?

April 10, 2026

Post-construction cleaning removes the dust and residue a remodel leaves behind once the trades are done. It covers fine drywall dust on every surface, inside cabinets and drawers, window tracks and sills, vents, light fixtures, baseboards, and paint, tape and sticker residue on glass and fixtures, finished with floors vacuumed and mopped.

It's slower than a regular clean because the dust is finer and it's everywhere, including places nobody has touched yet.

What's the difference between a rough clean and a final clean?

Most renovation jobs get cleaned in stages:

  • Rough clean. The contractor's crew hauls out debris, scrap, packaging and the worst of the dust. This is usually in the contract. Ask yours what "broom clean" means to them.
  • Final clean. After the last trade leaves, the whole space gets cleaned top to bottom so you can live in it. This is the clean most homeowners hire out.
  • Touch-up. If a painter or electrician comes back for a punch-list item, a quick pass picks up the new dust.

Book the final clean after the punch list is done. Clean too early and the next trade undoes it.

What does a post-construction clean include, room by room?

Kitchen

  • Inside every cabinet and drawer, where dust settles on new shelves.
  • Cabinet fronts, handles and the tops of upper cabinets.
  • Counters, backsplash and grout lines.
  • Appliance fronts, and inside the fridge and oven if they arrived wrapped or dusty.
  • Sink and faucet, with any caulk or sticker residue taken off.

Bathrooms

  • Grout haze on new tile, wiped and buffed.
  • Toilet, tub, shower glass and fixtures.
  • Inside vanity drawers and medicine cabinets.
  • Exhaust fan cover and light fixtures.

Every room

  • High dusting: ceiling corners, crown molding and the tops of door frames.
  • Light fixtures, ceiling fans, switch plates and outlet covers.
  • Vent covers and return grilles.
  • Window glass, sills and tracks, which fill with grit.
  • Doors, door frames and baseboards wiped by hand.
  • Floors vacuumed, then mopped. Hard floors usually need more than one pass.

What isn't part of a post-construction clean?

A cleaning crew cleans. It doesn't do trade work. Expect these to stay on the contractor's list:

  • Hauling debris, scrap lumber or leftover materials.
  • Scraping paint off walls, sanding or touch-up painting.
  • Removing heavy grout or thinset that has cured on tile.
  • Replacing HVAC filters or cleaning ductwork.
  • Anything on a ladder above normal reach.

Clear up who handles each of these before the job starts, so nobody points at somebody else at the end.

Why is construction dust so hard to clean?

Drywall and sawdust are much finer than house dust. Dry dusting pushes it into the air, and it lands right back down an hour later. A cleaner who knows the job works top to bottom, uses damp microfiber cloths instead of dry ones, and vacuums with a fine filter before any mop touches the floor.

Dust also hides. It sits on top of door frames, inside light fixtures and in window tracks, then drifts back out for weeks if it's missed. That's why one pass is rarely enough after a big job.

In an older house, ask your contractor whether any painted surfaces were sanded or cut. Older paint can contain lead, and that dust needs lead-safe cleanup handled by the contractor before a regular cleaning crew comes in.

How do you get ready for a post-construction clean?

  1. Make sure every trade is done, including the punch list.
  2. Have the contractor take out debris, tools and leftover materials.
  3. Turn the water and power on, and leave the lights working.
  4. Change the HVAC filter, or ask your contractor to. Running the system on a dusty filter spreads dust through the house.
  5. Tell the cleaner what's new: stone counters, unsealed grout, new floors. Some finishes need specific products.
  6. Do a walk-through after, with your list in hand.

Post-construction cleaning questions

When should I schedule cleaning after a renovation?

After every trade has finished, including the punch list. If a painter or electrician is still coming back, the dust comes back with them.

Does my contractor clean up after a renovation?

Most contractors do a rough clean: debris out and a broom sweep. That isn't the same as a final clean. Check your contract to see exactly what's included.

Why does dust keep coming back after a remodel?

Fine dust settles on high ledges, inside fixtures and in the HVAC system, then drifts back down. Change the filter, clean top to bottom with damp cloths, and plan on a second pass if the job was big.

Is post-construction cleaning the same as a deep clean?

No. A deep clean deals with build-up in a lived-in home. A post-construction clean deals with fine dust and residue from building work, often inside cabinets and fixtures nobody has used yet.

Talk to our office

Have a question about your home? Call (844) 460-4601, Monday to Friday, 9 AM to 5 PM.

We clean homes across Camden, Burlington, Gloucester and Ocean counties, from Cherry Hill and Mount Laurel to Long Beach Island.

The Cleaning Brigade

The Cleaning Brigade

The Cleaning Brigade is a locally owned house cleaning company serving South Jersey and the Jersey Shore. Formerly LBI Cleaning.

Back to Blog

Book your
first cleaning

Pick your service and see your price before you confirm. Or call and talk to our office.